|
The IG-500 OEM is a board only version of IG-500A and IG-500N products. It shares all characteristics and performance of the box version with a much smaller size and weight. This OEM version is perfect for a tight integration in your application.
The IG-500A is a low cost, high performance and miniature AHRS (Attitude and Heading Reference System). It uses a set of three MEMS based gyroscopes, accelerometers and magnetometers to compute, in real time, a precise and drift-free attitude (roll, pitch, yaw) even in dynamic conditions.
Thanks to an additional GPS receiver, the IG-500N is perfect for vehicles stabilization and navigation. It provides a GPS enhanced 3D orientation, velocity and position at 100Hz. The device also copes with transient accelerations allowing very accurate measurements even during long time turns.
In an incredibly small package 30x27 mm and in less than 10 grams, you have a full-featured navigation and stabilization solution that delivers consistent performance over a wide temperature range due to an advanced calibration procedure and a configurable Extended Kalman filter (EKF).
The OEM version has been carefully designed for total integration freedom by choosing only OEM adapted connectors.
Key Features:
-
Calibrated over full temperature range (-40 to 85°C)
-
Misalignments, cross axis and gyro-g effects corrected
-
Communication protocols: RS-232, USB
-
Very easy integration with a Board to Board or a Board to Wire connector
-
Tiny U.F.L. connector for GPS antenna (IG-500N only)
-
Very compact design (30x27x13 mm)
-
Very lightweight solution (<10 grams)
-
Low cost for high volumes
|
Download the IG-500A Leaflet 
Download the IG-500N Leaflet 
Download the IG-500E Leaflet
Read more about our Start Development Kit 
Check out the sbgCenter demo
|
Applications:
-
Unmanned vehicles, robotics
-
Vehicle motion analysis
-
Marine Industry
-
Gyro stabilized cameras
-
Sport and Biomechanics
-
Simulation and augmented reality
→ Read more about our applications.
Associated produts:
|
The IG-500A is a really small and accurate full featured AHRS (Attitude and Heading Reference System). In only 39 grams, this product includes a complete MEMS based Inertial Measurement Unit (IMU) and runs an on board Extended Kalman Filter that provides an accurate and drift-free 3d orientation as well as calibrated sensors data.
|
 |
|
Based on the IG-500A, this GPS enhanced Inertial Navigation System (INS) includes, in the same small package, all inertial sensors (gyroscopes, accelerometers, magnetometers) as well as a GPS receiver and a barometric altimeter. This product is perfect for vehicles navigation by providing a precise 3d orientation, velocity and position at high update rate up to 100 Hz.
|
 |
|
The IG-500E is a high performance miniature and cost effective aided inertial navigation and orientation sensor (AHRS). Thanks to a revolutionary architecture, the IG-500E accepts various external aiding information to deliver unmatched precision for both attitude and position measurements.
|
 |
In the starting box...
SBG Systems has designed a powerful and easy to use Development Kit especially for the OEM version. In just a few seconds, you can start evaluating and configuring your new device and integrate it in your application.
→ Read more about our Development Kit.
|
Products 
